The Jominy test: Determine the hardenability of three type of steels.

Objective The purpose of the Jominy tribulation in this experiment is to place the hardenability of trine types of blades, namely EN 8, EN 16 and EN 24. Introduction This circulate impart try to illustrate how the hardenability of these types of steels interpolate and why. This will be done by using the Jominy blockade quench testing on each of the test arranges and whence testing the grimness of the particular steel from the quench end, to the end of the test tack on. pickings these different points will enable me to countenance out how the cogency varies throughout the test piece considering the cool rate of the alloylic element and thus illustrate the hardenability of the steel. I will also conk out how adding different alloying elements to the steel can improve its hardenability. Theoretically what should happen is that as the surpass increases from the quenched end of the test piece the hardness should decrease. This is because when the metal is heated red hot (above its A3 temperature) and then cursorily cooled at one end, in this case by government function of water at a temperature of 250C, the carbon doesnt call for bonny time to precipitate out and is trapped which makes the metal harder.

that the test piece will only be quenched at one end and so the steel will have different hardness relative to the distance from the quenched end. unconscious process Three test pieces EN 8, EN 16 and EN 24 were heated above their A3 temperature to create a uniform austenitic structure and then end quenched by elbow room of water at 250C. Taking safe in to stipul ation it should be noted that the test piece! should not be handled until the whole test piece has cooled down. aft(prenominal) this the test piece was mounted in the Vickers hardness... If you want to get a across-the-board essay, order it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper